How do I know if it is working properly? Can't find any settings in Bios for SAS drives but during the boot, it shows SAS bios initializing. With the drive attached to the USB adapter open an elevated command prompt.
CANT INITIALIZE DRIVE WINDOWS 10
The methods above are available on Windows 10 / 8 to initialize disk. If the disk still cannot be initialized after modifying CMOS setup, you can run anti-virus software to check if the disk is infected with virus. I've never used the board SAS controller before. Whether it is an external hard drive or internal hard drive, it might be unable to be initialized by Windows 8 or Windows 10 when the disk is corrupted or has some other problems. Neither Windows 7 or my recovery disk partition manger can initialize it. Right-click and choose to create a new simple volume by clicking on the respective option. For this, just go to the Disk Management application and select the unallocated space. I just purchased these used SAS drives on ebay and the seller said they worked, so it might be the Z800. If the hard drive has an unsupported file system, then you can format it to do the hard disk not initialized fix.
I moved the dive to Bay(2) and changed the Bay(2) plug to SAS(0) controler plug thinking a blind connector might be faulty on Bay(1) but the drive still can't be initialized. I tried a different SAS drive and had the same problem.
If this fails, the drive is probably failing and needs to be replaced. I have OpenPLi 6.1 on a USB (multiboot) and I cant initialize and mount the hard drive. If you want, You can Initialize the drive here by typing Convert MBR and press enter, or you can go back to Disk Management or Minitool to Initialize the drive MBR and Create a Partition and Format it.
The preliminary device-initialization methods apply to any device supported by your driver.
CANT INITIALIZE DRIVE DRIVER
The SAS Bios recognizes SAS drive but it can not be initialized. Cant Initialize and Mount Hard Drive - VU+ Ultimo 4K - posted in EN Enduser support: Hi thank you for allowing me to join the forum. The methods below are invoked by Windows or by the driver during the early initialization phase. This can be done via a GUI, so even beginners can do it.
CANT INITIALIZE DRIVE INSTALL
I also connected all the remaining unused cables(2,3) to the SAS controler plugs as per the HP Service Doc. If you install a new hard drive in your PC you must first initialize the hard drive in Windows 7. The SAS drive fit perfectly into the drive bay(1) and I moved the Bay 1 cable to the SAS to the SAS(0) controler plug.
0 kommentar(er)
